technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http: //www.microsemi.com npn darlington power silicon transistor qualified per mil-prf-19500/539 t4-lds-0171 rev. 1 (101129) page 1 of 3 devices levels 2n6300 2n6301 jan jantx jantxv absolute maximum ratings (t c = +25c unless otherwise noted) parameters / test conditions symbol 2n6300 2n6301 unit collector-emitter voltage v ceo 60 80 vdc collector-base voltage v cbo 60 80 vdc emitter-base voltage v ebo 5.0 vdc base current i b 120 madc collector current i c 8.0 adc total power dissipation @ t c = +0c (1) @ t c = +100c p t 75 32 w operating & storage junction temperature range t j , t stg -55 to +200 c note: 1. derate linearly 0.428w/c above t c > 0c electrical characteristics (t a = +25c, unless otherwise noted) parameters / test conditions symbol min. max. unit off charactertics collector-emitter voltage ic = 100madc 2n6300 2n6301 v (br)ceo 60 80 vdc collector-emitter cutoff current v ce = 30vdc v cb = 40vdc 2n6300 2n6301 i ceo 0.5 0.5 madc collector-emitter cutoff current v ce = 60vdc, v be = -1.5vdc v ce = 80vdc, v be = -1.5vdc 2n6300 2n6301 i cex 0.5 0.5 madc emitter-base cutoff current v eb = 5.0vdc i ebo 2.0 madc to-66 (to-213aa)
technical data sheet 6 lake street, lawrence, ma 01841 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 website: http: //www.microsemi.com t4-lds-0171 rev. 1 (101129) page 2 of 3 electrical characteristics (t a = +25c, unless otherwise noted) parameters / test conditions symbol min. max. unit on characteristics (3) forward-current transfer ratio h fe i c = 1.0adc, v ce = 3.0vdc 500 i c = 4.0adc, v ce = 3.0vdc 750 18,000 i c = 8.0adc, v ce = 3.0vdc 100 collector-emitter saturation voltage v ce(sat) vdc i c = 4.0adc, i b = 16madc i c = 8.0adc, i b = 80madc 2.0 3.0 base-emitter saturation voltage v be(sat) vdc i c = 8.0adc, i b = 80madc 4.0 base-emitter voltage v be(on) vdc i c = 4.0adc, v ce = 3.0vdc 2.8 dynamic characteristics parameters / test conditions symbol min. max. unit magnitude of common emitter small?signal short-circuit forward current transfer ratio |h fe | i c = 3.0adc, v ce = 3.0vdc, f = 1.0mhz 25 350 small-signal short-circuit forw ard current transfer ratio h fe i c = 3.0adc, v ce = 3.0vdc, f = 1.0khz 300 output capacitance c obo 200 pf v cb = 10vdc, i e = 0, 100khz f 1.0mhz switching characteristics parameters / test conditions symbol min. max. unit turn-on time v cc = 30vdc; i c = 4.0adc; i b1 = 16madc t on 2.0 s turn-off time v cc = 30vdc; i c = 4.0adc; i b1 = i b2 = 16madc t off 8.0 s safe operating area dc test t c = 25c, 1 cycle, t = 1.0s test 1 v ce = 8.0vdc, i c = 8.0adc test 2 v ce = 20vdc, i c = 2.0adc test 3 v ce = 60vdc, i c = 100madc v ce = 80vdc, i c = 100madc 2n6300 2n6301 (2) pulse test: pulse width = 300 s, duty cycle 2.0%.
technical data sheet 6 lake street, lawrence, ma 01841 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 website: http: //www.microsemi.com t4-lds-0171 rev. 1 (101129) page 3 of 3 package dimensions notes: 1 dimensions are in inches. 2 millimeters are given for general information only. 3 body contour is optional within zone defined by cd. 4 these dimensions should be measured at points .050 inch (1.27 mm) to .055 inch (1.40 mm) below seating plane. when gauge is not used, measurement will be made at seating plane. 5 both terminals. 6 at both ends. 7 two holes. 8 the collector shall be electrically connected to the case. 9 ld applies between l1 and ll. lead diamet er shall not exceed tw ice ld within l1. 10 in accordance with asme y14.5m , diameters are equivalent to x symbology. figure 1. physical dimensions (to-66) . dimensions symbol inches millimeters notes min max min max cd .620 15.75 3 ch .250 .340 6.35 8.64 ht .050 .075 1.27 1.91 3 hr .350 8.89 hr 1 .115 .145 2.92 3.68 6 ld .028 .034 0.71 0.86 5, 9 ll .360 .500 9.14 12.70 5 l 1 .050 1.27 5, 9 mhd .142 .152 3.61 3.86 7 mhs .958 .962 24.33 24.43 ps .190 .210 4.83 5.33 4 ps 1 .095 .105 2.41 2.66 4 s .570 .590 14.48 14.99 4
|
